Omni Cubed’s Angle Bracket is used with the Sink Hole Saver.
RSVP BELOW
Omni Cubed’s Angle Bracket is used with the Sink Hole Saver.
The Pro-Lift Automatic provides a safer means of stone transportation and installation. It has been designed to reduce physical strain and risk of injury, while increasing productivity and efficiency. The cart accommodates any size countertop up to 453kg. The cart can be used to lower, lift, and roll extremely large pieces around the shop and install location, as well as assist with final countertop placement. The power lift feature elevates stone up to 114cm from ground to support rail, and enables controlled tilting for easier, less hazardous installation.
• Safely and easily lifts stone into position for hassle free installation
• Wireless remote control allows workers to keep a safe distance and out of the fall shadow
• 28V rechargeable lithium-ion battery
• Integrated kickbrake for safety and convenience
The ALL-NEW 90° Manual Stealth Seamer™ is the ideal solution for consistently creating high-quality perpendicular seams such as mitered aprons, butt-joints, and compound corners—without the hassle of straps or bar-clamps. It is the only 90° seamer that can also be inverted for inside corners. The product’s proprietary non-marking cups feature our FTS™ (Flexible Triple Seal) technology that locks-in vacuum and provides optimum hold—even on textured and leathered materials.
Smooth-turning knurled rollers pull pieces together for expert alignment, and fine-tune levelers help dial-in the perfect angle for precise seams. An integrated counter-pressure leveler helps overcome the lower outswing of vertical pieces. Easy to read indicators allow monitoring vacuum pressure at a glance, and cups can be re-pumped without loss of remaining pressure, unlike screw-knob or flip-lever suction cups. Sold individually; not recommended for porous material or heavy waterfall pieces (see 90° Auto for these applications). [read]
PATENTS PENDING
• Consistently create high-quality, expertly aligned perpendicular seams
• Ideal for mitered aprons, butt-joints, compound corners, and inside corners
• Proprietary, non-marking vacuum cups won’t stain surfaces
• FTS™ vacuum cup technology for optimum hold on textured and leathered materials
• Knurled rollers and fine-tune levelers align and dial-in precise angles
• Counter-pressure leveler overcomes lower outswing of vertical pieces
• Easy to read indicators to monitor vacuum pressure at a glance
• Cups can be re-pumped without loss of remaining pressure[/read]
The ALL-NEW 90° Auto Stealth Seamer™ is the most versatile tool on the market for creating high-quality perpendicular seams without the hassle of straps or bar-clamps. The 90° Auto is the ideal solution for waterfall edges, mitered aprons, butt-joints, and compound corners. It is the only 90° seamer that can also be inverted for inside corners. The product’s proprietary non-marking cups feature our FTS™ (Flexible Triple Seal) technology that locks-in vacuum and provides optimum hold—even on textured and leathered materials.
Smooth-turning knurled rollers pull pieces together for expert alignment, and fine-tune levelers help dial-in the perfect angle for precise seams. An integrated counter-pressure leveler helps overcome the lower outswing of vertical pieces. For larger pieces such as waterfall designs, use the Anchor Cup Attachments for additional support (included with every 90° Auto system). The Anchor Cup Attachments can also be used independently as a non-marking carrying device.
A powerful, compact vacuum pump maintains maximum pressure for all cups in the Auto system, so you can set the seam and walk away with confidence. The high-capacity pump runs on AC power or AA batteries for any install situation. Sold in pairs with a convenient storage case; recommended for porous and non-porous materials.
PATENTS PENDING
• Consistently create high-quality, expertly aligned perpendicular seams
• Ideal for waterfall edges, mitered aprons, butt-joints, compound corners, and inside corners
• Proprietary, non-marking vacuum cups won’t stain surfaces
• FTS™ vacuum cup technology for optimum hold on textured and leathered materials
• Knurled rollers and fine-tune levelers help align and dial-in precise angles
• Counter-pressure leveler overcomes lower outswing of vertical pieces
• Includes Anchor Cup Attachments to accommodate waterfall edges or other large pieces
• Powerful, compact pump maintains max pressure for entire system
• Runs on AC power or AA batteries for any situation
The NEW Sink Hole Saver™ Edge is the perfect solution for protecting cutouts, backsplashes, and other fragile pieces during fabrication, transportation, and installation. The mechanical clamps have been re-engineered for improved functionality, featuring a wider clamping range, enhanced tightening knobs, and new rubber bumper guards to protect finished edges. The clamps securely grip material edges and slide in the stiffening rail for custom placement. Easy-grasp knobs make attachment and tightening quick and effortless. The Sink Hole Saver™ Edge is available in three lengths, and can be used with the Angle Bracket accessory for a variety of applications.
PATENT US7789379
PATENT US8047516
ADDITIONAL US PATENT PENDING
New features for the new model include a wider clamping range, enhanced tightening knobs, and rubber bumper guards.
• Pays for itself with one prevented break™
• Edge-mounted reinforcement system for fragile materials
• Perfect solution for strengthening cutouts, backsplashes, and other fragile pieces
• Mechanical clamps slide in rail for custom placement
• Easy-grasp knobs make attachment quick and effortless
• Available in three lengths: 4’, 6’, and 8’
• Available accessories: Angle Bracket
The ALL-NEW Nano Manual Stealth Seamer™ joins and levels countertops to consistently create high-quality, even seams with more control and less effort than traditional methods. The product’s proprietary non-marking cups feature our FTS™ (Flexible Triple Seal) technology that locks-in vacuum and provides optimum hold even on textured and leathered materials. The Nano’s wide-open design and high-clearance driveshaft keep seams extremely accessible for epoxy application and removal—no need to waste time scraping the seam after glue has set. 5” vacuum cups allow working with smaller pieces such as backsplashes, or in tighter spaces around sinks and other cutouts. A smooth-turning knurled roller opens and closes seams with ease, and non-spinning leveling feet help fine-tune the seam without scratching surfaces. Easy to read indicators allow monitoring vacuum pressure at a glance, and cups can be re-pumped without loss of remaining pressure, unlike screw-knob or flip-lever suction cups. Use alone for short seams, or in multiples for longer seams. Sold individually; recommended for non-porous materials.
PATENTS PENDING
• Consistently create high-quality, even seams
• 5” cups allow seaming smaller pieces and tighter spaces
• More control and less effort than shims and screws
• Proprietary, non-marking vacuum cups won’t stain surfaces
• FTS™ vacuum cup technology for optimum hold on textured and leathered materials
• Easily access seams for epoxy application and removal
• Non-spinning leveling feet won’t scratch surfaces
• Smooth-turning knurled roller opens and closes seams with ease
• Easy to read indicators help monitor vacuum pressure at a glance
• Re-pump cups without loss of remaining pressure
The ALL-NEW Nano Auto Stealth Seamer™ joins and levels countertops to consistently create high-quality, even seams with more control and less effort than traditional methods. The product’s proprietary non-marking cups feature our FTS™ (Flexible Triple Seal) technology that locks-in vacuum and provides optimum hold—even on textured and leathered materials. The Nano’s wide-open design and high-clearance driveshaft keep seams extremely accessible for epoxy application and removal—no need to waste time scraping the seam after glue has set. 5” vacuum cups allow working with smaller pieces such as backsplashes, or in tighter spaces around sinks and other cutouts. A smooth-turning knurled roller opens and closes seams with ease, and non-spinning leveling feet help fine-tune the seam without scratching surfaces. A powerful, compact vacuum pump maintains maximum pressure for all cups in the Auto system, so you can set the seam and walk away with confidence. The high-capacity pump runs on AC power or AA batteries for any install situation. Sold in pairs with a convenient storage case; recommended for porous and non-porous materials.
PATENTS PENDING
• Consistently create high-quality, even seams
• 5” cups allow seaming smaller pieces and tighter spaces
• More control and less effort than shims and screws
• Proprietary, non-marking vacuum cups won’t stain surfaces
• FTS™ vacuum cup technology for optimum hold on textured and leathered materials
• Easily access seams for epoxy application and removal
• Non-spinning leveling feet won’t scratch surfaces
• Smooth-turning knurled roller opens and closes seams with ease
• Powerful, compact pump maintains max pressure for entire system
• Runs on AC power or AA batteries for any situation
The Miter-It™ is an easy-to-use jig that allows finished-side-up miter laminations. Not flipping the material offers numerous benefits including increased safety for workers, reduced risk of damage to the material, and keeping the seam in view during lamination. The clamp offers coarse and fine adjustment settings for achieving exact seams. The Miter-It securely holds drop-down edges at 90°, eliminating the need for a helper to position the material. The jig's weight and non-marking, non-skid contact surface hold the product and miter piece in place—no suction cups needed. This simple, yet innovative tool greatly reduces the numerous awkward adjustments required with other miter clamps, and offers better results than taping methods alone. The heavy-duty steel design features a powder-coat finish and accommodates edges from 38mm to 152mm. Sold individually.
Typically, one jig every 2 to 4 feet is sufficient, but more may be used for extra long or heavy aprons. Wherever you would need a hand to hold the material, put a Miter-It™ there instead!
PATENT US9393765
• Miter finished side up; keep the seam in view
• No flipping for gluing; protect your back and the material
• Squares the miter with fast, easy adjustments, eliminating the need for a helper
• Coarse and fine adjustments for exact seams
• More efficient than taping methods alone
• Jig's weight and non-skid contact points hold it in place
• Highly durable steel construction with powder-coat finish
The Automatic Stealth Seamer™ is the ultimate heavy-duty seam setter for joining, leveling, and flattening stone. The product's open design allows you to work on the seam while in use; removal is not needed to apply epoxy or scrape the seam. Seams are easily opened and closed via a smooth-turning knurled roller. The 8″ vacuum cups feature a continuous seal for a reliable hold on heavy stone. A powerful compact vacuum pump maintains pressure for all cups, and runs on AC power or AA batteries for any install situation. Improved pump technology provides a stronger hold to very textured or porous materials. Eight seam levelers slide on rails for custom placement and have vinyl-capped, non-spinning feet to prevent scratches. Recommended for porous and non-porous materials.
PATENT USD644497
• Joins, levels, and flattens stone to deliver superior seams, every time
• Entire seam is accessible for epoxy application or removal
• 8” vacuum cups feature a continuous seal for strong, reliable hold, and won't lose suction if loss of power occurs
• Eight leveling feet adjust easily to fine-tune the seam and eliminate unevenness of warped stone
• Vinyl-capped leveling feet slide for custom placement, but won't scratch surfaces
• Heavy-duty, compact vacuum pump runs on AC or battery power
• Easily converted to manual seam setters
• Quick-connect air tube fittings for easy setup
• Durable anodized billet aluminum and stainless steel components
ALL-NEW FEATURES
• Grey, non-marking vacuum cups won’t stain light materials – bring on the white marble!
• Cups feature completely closed, triple sealing rings and are composed of a proprietary rubber that conforms to textured and porous surfaces for a strong, reliable hold.
• More durable manual thumb pump of our own patent-pending design.
• Improved vacuum-release valve is more resistant to epoxy and solvents.
PRODUCT HIGHLIGHTS
• Joins, levels, and flattens warped stone to help consistently produce a “seamless” look
• Entire seam is accessible while product is in use
• Proprietary, non-marking vacuum cups won’t stain surfaces
• Four leveling points to fine-tune the seam and eliminate unevenness of natural materials
• Durable, 8” cups feature a continuous triple seal for strong, reliable hold
• Easy to read indicators help monitor vacuum pressure at a glance
• Cups can be re-pumped in place, without removal or loss of remaining pressure
• Non-spinning, vinyl-capped leveling feet won’t scratch finished tops
• Smooth-turning knurled roller opens and closes seams with ease
The Miter-It™ is an easy-to-use jig that allows finished-side-up miter laminations. Not flipping the material offers numerous benefits including increased safety for workers, reduced risk of damage to the material, and keeping the seam in view during lamination. The clamp offers coarse and fine adjustment settings for achieving exact seams. The Miter-It securely holds drop-down edges at 90°, eliminating the need for a helper to position the material. The jig's weight and non-marking, non-skid contact surface hold the product and miter piece in place—no suction cups needed. This simple, yet innovative tool greatly reduces the numerous awkward adjustments required with other miter clamps, and offers better results than taping methods alone. The heavy-duty steel design features a powder-coat finish and accommodates edges from 38mm to 152mm. Sold individually.
Typically, one jig every 2 to 4 feet is sufficient, but more may be used for extra long or heavy aprons. Wherever you would need a hand to hold the material, put a Miter-It™ there instead!
PATENT US9393765
• Miter finished side up; keep the seam in view
• No flipping for gluing; protect your back and the material
• Squares the miter with fast, easy adjustments, eliminating the need for a helper
• Coarse and fine adjustments for exact seams
• More efficient than taping methods alone
• Jig's weight and non-skid contact points hold it in place
• Highly durable steel construction with powder-coat finish